Meru Networks AP332 Installation Manual page 40

Installing AP332i
Use the optional T-bar box hanger mounting kit to mount AP332i above suspended ceiling T-rails. The
installation attaches the T-bar box hanger to the ceiling rails and then the AP332i attaches to the T-
bar box hanger. Note that AP332i mounted above the ceiling has about 2-3 dBm less RF coverage than
AP332i mounted under the ceiling.
You may need to modify thicker tiles to support this installation.
Warning! When installed in air-handling spaces, such as above a suspended ceiling,
power the AP332i only with a PoE, not a power supply.
To mount an AP332i above the ceiling with the optional T-bar kit, follow these steps:
1. Determine the location on the ceiling rails where the AP will be mounted and remove the ceiling
tile.
2. Unpack the T-bar hanger kit.
3. Attach the mounting bar (depicted in
handle) with the crossbar of the mounting kit sandwiched between them. See
Figure 19: Mounting Bar
28 Meru Access Point Installation Guide
Figure 19) to the mounting brace (which looks like a small
Figure 20.
© 2012 Meru Networks, Inc.