Installing Ap332I; Safety Precautions; Unpack The Ap332I; Chapter 3 Installing Ap332I - Meru Networks AP332 Installation Manual

AP332i is supported by System Director versions 5.3 and greater. This chapter describes how to install
and configure an AP332i. It contains the following sections:

Safety Precautions



Unpack the AP332i



Installing AP332i


Check AP332i LED Activity

Where to Go From Here

Safety Precautions
IMPORTANT—Read and follow the regulatory instructions in Appendix B before installing and operating
this product.
If an optional power supply is used, it must be one supplied by Meru Networks.
Warning!
The AP332i is only intended for installation in Environment A as defined in IEEE 802.3af. All intercon-
nected equipment must be contained within the same building, including the interconnected equip-
ment's associated LAN connection.
Unpack the AP332i
Confirm that the shipping box contains the following:
AP332i

© 2012 Meru Networks, Inc.
For Power over Ethernet, an 802.3af or 802.3at connection must be used.
Safety Precautions
Chapter 3
Installing AP332i
Installing AP332i 21