Ap320I - Meru Networks AP332 Installation Manual

Air Traffic Control technology for 802.11n devices and legacy a/b/g devices


3x3 MIMO with 3 chains and 3 receive chains, delivering two spatial streams
For AP302 and AP311, the a/b/g radio software upgrades to 802.11n for maximum

investment protection.
Channel span architecture which requires no channel planning or configuration

Six standard multiband, omni-directional antennas for AP302, AP311, AP320, and

AP332 models. Three standard multiband, omni-directional antennas for AP310
and AP301.
Powered by 5 volt DC input, 802.3af or 802.3at compliant PoE device.

Figure 2: AP300e

AP320i

The AP320i Access Point is an internal-antenna AP with two dual-band 802.11n radios
and 3x3 MIMO and internal antennas.
Features for the AP320i include:
Internal antennas

802.11n support with channel bonding in both 2.4GHz and 5GHz frequency bands.

Channel bonding combines two 20Mhz channels into a single-wide 40Mhz channel
for increased throughput.
Plug and Play deployment using centralized controller platforms

Multi-layered security including standard WPA2 features such as automatic traffic

inspection
Standard 802.3af PoE support and support for many 802.3at devices

© 2012 Meru Networks, Inc.
AP300
Access Points 3