Table of Contents
Advertisement
This appendix provides quick overviews regarding several external antennas that are
supported in conjunction with AP300 models. Each model provides brief instructions
on antenna installation.
ANT-ABGN-23
Suspended-ceiling mounting clips are provided on the rear panel of the antenna
package. Make two small slots in the tile to pass the feedlines, then install the
antenna on the tile-support rail, as shown in
Figure 22: Basic I-Beam Installation
For installations using recessed-edge tiles, use the supplied plastic recessed tile
adapter clips. Snap clips onto the ceiling-tile grid then mount the antenna to the
clips, as shown in
© 2012 Meru Networks, Inc.
Optional External Antennas
Figure
23.
Appendix D
Figure
22.
Optional External Antennas 53
Hide quick links:
Advertisement
Table of Contents
