European Directive Information; Telecommunication Compliance; Fcc And Ic; Ordinary Location Certification For Fm Approvals - Emerson Rosemount 702 Reference Manual

Product Certifications
July 2017
Appendix B
Rev. 1.0
European Directive Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 105
Telecommunication compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 105
FCC and IC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 105
Ordinary Location Certification for FM Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 105
Installing in North America . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 105
Installation Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 109
B.1 European Directive
Information
A copy of the EC Declaration of Conformity can be found at
the end of the Quick Start Guide. The most recent revision
of the EC Declaration of Conformity can be found at
Emerson.com/Rosemount
B.2 Telecommunication
compliance
All wireless devices require certification to ensure that they
adhere to regulations regarding the use of the RF spectrum.
Nearly every country requires this type of product
certification. Emerson is working with governmental
agencies around the world to supply fully compliant
products and remove the risk of violating country directives
or laws governing wireless device usage.
B.3 FCC and IC
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions: This device
may not cause harmful interference. This device must
accept any interference received, including interference
that may cause undesired operation. This device must be
installed to ensure a minimum antenna separation distance
of 20 cm from all persons.
105
Product Certifications
B.4 Ordinary Location
Certification for FM
Approvals
As standard, the transmitter has been examined and tested
to determine that the design meets the basic electrical,
mechanical, and fire protection requirements by FM
Approvals, a nationally recognized test laboratory (NRTL) as
accredited by the Federal Occupational Safety and Health
Administration (OSHA).
B.5 Installing in North America
The US National Electrical Code
Electrical Code (CEC) permit the use of Division marked
equipment in Zones and Zone marked equipment in
Divisions. The markings must be suitable for the area
classification, gas, and temperature class. This information
is clearly defined in the respective codes.
B.6 USA
I5 FM Intrinsic Safety (IS) and Nonincendive (NI)
Certificate: 3031506
Standards: FM Class 3600 - 1998, FM Class 3610 -
2010, FM Class 3611 - 2004, FM Class
3810 - 2005, ANSI/NEMA 250 - 2003
Markings: IS CL I, DIV 1, GP A, B, C, D; CL II, DIV 1, GP
E, F, G; Class III; Class 1, Zone 0 AEx ia IIC
T4; NI CL I, DIV 2, GP A, B, C, D T4;
T4(–50 °C ≤ T
Rosemount drawing 00702-1000; Type
4X; IP66.
Reference Manual
00809-0200-4702, Rev DA
®
(NEC) and the Canadian
≤ +70 °C) when installed per
a
Product Certifications