Emerson Rosemount 702 Reference Manual page 27

Reference Manual
00809-0200-4702, Rev DA
Note
Wireless devices should only be powered up after the Emerson
from the Gateway beginning with the closest device. This results in a simpler and faster network
installation.
Figure 3-2. Power Module Installation
5. Close the housing cover and tighten to safety specifications. Always ensure a proper seal by installing
the electronic housing covers so that metal touches metal, but do not over tighten.
6. Position the antenna such that it is vertical, either straight up or straight down, as shown in
Figure
allow clear communication to other devices.
Figure 3-3. Antenna Positioning
Mounting, Wiring Switches, and Sensors: Models 702DX22 and 702DX61
3-3. The antenna should be approximately 3 ft. (1 m) from any large structures or buildings, to
Possible antenna rotation shown.
Antenna rotation allows for best
installation practices in any
configuration.
Mounting, Wiring Switches, and Sensors:
Models 702DX22 and 702DX61
™
Wireless Gateway, in order of proximity
July 2017
17