Ams Wireless Configurator - Emerson Rosemount 702 Reference Manual

Reference Manual
00809-0200-4702, Rev DA
Figure 4-4. Gateway Explorer Page
4.5.1

AMS Wireless Configurator

When the device has joined the network, it will appear in the Device Manager as illustrated below:
Troubleshooting
If the device is not joined to the network after power up, verify the correct configuration of the Network
ID and Join Key, and verify that Active Advertising has been enabled on the Gateway. The Network ID and
Join Key in the device must match the Network ID and Join Key of the Gateway.
The Network ID and Join Key may be obtained from the Gateway on the
Setup>Network>Settings page on the web interface (see
Key may be changed in the wireless device by using the following Fast Key sequence.
Function
Wireless
Commissioning: Models 702DX22 and 702DX61
Commissioning: Models 702DX22 and 702DX61
Key Sequence
2,1,1 Join Device to Network
Figure 4-4 on page 31). The Network ID and Join
Menu Items
July 2017
31