Bidir-Pim Configuration Example - HP MSR2003 Configuration Manual

[RouterD] display pim rp-info
BSR RP information:
Scope: non-scoped
Group/MaskLen: 224.0.0.0/4
RP address
10.110.9.1
Scope: 239.0.0.0/8
Group/MaskLen: 239.0.0.0/8
RP address
10.110.5.2 (local)
# Display RP information on Router F.
[RouterF] display pim rp-info
BSR RP information:
Scope: non-scoped
Group/MaskLen: 224.0.0.0/4
RP address
10.110.9.1 (local)

BIDIR-PIM configuration example

Network requirements
As shown in
VOD streams are sent to receiver hosts in multicast.
•
Source 1 and Source 2 send multicast data to the multicast group 225.1.1.1.
•
Host A and Host B are receivers of this multicast group.
•
IGMPv2 runs between Router B and Host A and between Router D and Host B.
•
Figure 46 Network diagram
Receiver 1
Host A
Source 1
Figure 46:
Router B
GE2/1/1
GE2/1/2
GE2/1/2
GE2/1/1
Router A
Priority HoldTime
192 150
Priority HoldTime
192 150
Priority HoldTime
192 150
GE2/1/3 GE2/1/1
GE2/1/2
BIDIR-PIM
GE2/1/3
127
Uptime Expires
00:03:42 00:01:48
Uptime Expires
00:06:54 00:02:41
Uptime Expires
00:00:32 00:01:58
Loop0
Router C
GE2/1/2
Router D
Receiver 2
Host B
Source 2