Table of Contents
Advertisement
4.9 Clearing the Memory
In SET-UP, select "Clear memory" by using the ▼ button to highlight this function.
Press the ► button to enter this mode.
To erase the content of one or more specific OBJ : TEST numbers:
• Select "Select Data Sets to Clear" by pressing the ► button.
• Then, select each memory to be erased using the ▲ , ▼ buttons to
choose it and the ► button to select it. The ◄ button will deselect it.
• Validate by pressing DISPLAY. The operation is confirmed by pressing
the ► button with the OK option highlighted, or cancelled by pressing the
► button with the CANCEL option highlighted.
SET-UP
Instr.Nr. 9600004
Rc reference temperature
∆T for R/2
Calculate ∆T from Memory
Maxumum Output Voltage
Set Default Parameter
Clear Memory
V Disturbance / V Output
Buzzer
SET-UP
Clear memory:
Obj. Test
Date
47 99 15.12.2003 07:04 625V
13 59
07.12.2003 22:39 3800V
13 58
29.11.2003 15:47
02 03 24.11.2003 15:04 2150V
To erase the entire memory:
• Select "Clear All" by pressing the ▼ button to highlight it and the ► button
to choose it.
• The operation is confirmed or cancelled by pressing the ► button when
the appropriate choice is highlighted as described above.
SET-UP
Clear memory:
Select Data Sets to Clear
Clear All
52
SW Version 1.2
40°C
10°C
5100V
30%
on
Time
Fct.
50V
SET-UP
Clear memory:
Select Data Sets to Clear
Clear All
SET-UP
!WARNING!
All selected data sets
will be cleared!
O.K.
CANCEL
SET-UP
!WARNING!
All data sets
will be cleared!
O.K.
CANCEL
Megohmmeter Model 5070
Advertisement
Table of Contents
