Set-Up Menu - AEMC 5070 User Manual

TIME (h:m)
Time can be set here. A 24-hour clock is used in the Model 5070.
Therefore 3:30pm would be programmed in as 15:30.
Press the down arrow ▼ button until the blinking cursor is to the left of Time. To
adjust the Time, press the right arrow ► button to highlight the current setting. The
cursor will move to the hour selection. Next, press the up ▲ or down ▼ arrow but-
tons to select the desired hour from 0 to 24. Press the right arrow ► button again
to highlight minutes. Next, press the up ▲ or down ▼ arrow buttons to select the
desired minutes from 0 to 59. Finally, press the right arrow ► button after you have
selected the time set up to complete the process.
4.1.3

SET-UP Menu

Turning the rotary switch to SET-UP gives you access to the menu of all program-
mable functions. Select the function to be modified using the ▲ and ▼ buttons.
Move the blinking cursor to the value to be modified using the ◄ and ► buttons.
Adjust the value at the blinking cursor using the ▲ and ▼ buttons. Move back to
the select function position by pressing the ◄ and ► buttons until the blinking
cursor is again to the left of the function.
Pressing the DISPLAY button while modifying a parameter will bring you back to
the top of the SET-UP menu.
When you first enter the SET-UP mode a display similar to this will appear:
• The top line on this screen indicates that you are in SET-UP mode.
• Line two indicates the Model 5070's Instrument Number and Software Version.
• The selection cursor will be blinking and positioned to the left of the "Display
Contrast" parameter.
To adjust the "Display Contrast" parameter, press the ► button to move the blink-
ing cursor to display contrast value. The default value is 80. Use the ▲ and ▼
buttons to lighten or darken the display. The higher the number the lighter the
display will be. When finished, press the ◄ button to move the cursor back to the
parameter selection position.
The arrow buttons can be used to modify any parameter.
Megohmmeter Model 5070
SET-UP
Instr.Nr. 9600004
Display contrast
Alarm Settings
Adjustable Voltage 1
Adjustable Voltage 2
Adjustable Voltage 3
Timed Run (h:m)
Sample Time (m:s)
DAR (s/s)
SW Version 1.2
80
50V
100V
250V
0:10
0:10
30/60
27