7.1 Installing DataView
INSTALL DATAVIEW
BEFORE CONNECTING THE INSTRUMENT TO THE COMPUTER.
NOTE: When installing, the user must have Administrative access rights
during the installation. The users access rights can be changed after the
installation is complete.
DataView
must be reinstalled for each user in a multi-user system.
®
USB Flash Drive Install
1. Insert the USB stick into an available USB port (wait for driver to be installed).
2. If Autorun is enabled then an AutoPlay window should appear as shown.
Megohmmeter Model 5070
CHAPTER 7
DATAVIEW
®
BEFORE INSTALLING THE USB DRIVERS AND
®
SOFTWARE
®
71