Capacitance Measurement; Residual Current Measurement - AEMC 5070 User Manual

Similarly, if the DAR or PI mode is selected as measurement mode before the test,
the measurement is stopped automatically after the time programmed to calculate
them has occurred (time defined in SET-UP).
A number of special functions can be used during the measurement (see § 4).

5.3 Capacitance Measurement

The capacitance measurement is performed automatically during the insulation
measurement, and is displayed after the measurement stops and the circuit has
been discharged.

5.4 Residual Current Measurement

The residual current circulating in the installation is measured and displayed auto-
matically upon connection to the installation, it is all measured during and after the
insulation measurement.
58
Megohmmeter Model 5070