Sound Notifications - Newland BS8050-3V Piranha User Manual

Sound Notifications

Turn sound notifications on or off by scanning the appropriate barcode below. After this feature is enabled,
the scanner beeps when one of the following events occurs:
1. The scanner is turned on.
2. The scanner resets.
3. A barcode is decoded (including good read for removing barcode data from the FLASH memory).
4. The scanner switched to the Wireless mode or USB mode.
5. Transmitting data via Bluetooth failed.
6. iOS soft keyboard is turned on or off.
7. Data transmission via USB starts.
8. Data transmission via USB is interrupted.
9. Data transmission via USB is completed.
10. The paired Bluetooth device is unpaired from the scanner.
11. The scanner is turned off.
12. USB connection between the scanner and the host established.
13. USB connection between the scanner and the host lost.
14. Bluetooth connection between the scanner and the host established or lost.
Sound Notifications Off
Sound Notifications On (default)
14