Chapter 6 Beep & Led Notifications; Startup Beep; Good Read Beep For Non-Programming Barcode - Newland NLS-HR22 User Manual

Startup Beep

If startup beep is enabled, the scanner will beep after being turned on.
** Enable Startup Beep

Good Read Beep for Non-programming Barcode

Scan the appropriate barcode below to enable or disable the emission of beep when a non-programming
barcode is decoded . Beep type (frequency) and volume are also user programmable.
** Good Read Beep On for Non-programming Barcode
45
Chapter 6 Beep & LED Notifications
Disable Startup Beep
Good Read Beep Off for Non-programming Barcode
Enter Setup
** Exit Setup