Led Notifications - Newland BS8050-3V Piranha User Manual

LED Notifications

Red LED on
Green LED on
Red and green LEDs flash alternately
Red LED flashes
If the scanner is on and it is not connected to PC via USB cable, pressing the Scan/Power
button and Delete/Reset button at the same time can display the battery level with the
Charging/Battery LED.
Green LED on
Red and green LEDs on
Red LED on
When the battery voltage is too low, the scanner will beep with flashing red Charging/Battery LED. Please
charge it immediately before the scanner shuts down mandatorily. When it shuts down, please charge it
fully before turning it back on.
Green LED flashes
Red LED flashes
Red LED on
Blue LED flashes slowly with long off state
Blue LED flashes slowly with long on state
Blue LED on
Blue LED flashes quickly
Red LED on
Red LED flashes quickly
Charging/Battery LED
Charging in progress.
Fully charged.
Battery not found.
Low battery alert.
Battery level is high.
Battery level is medium.
Battery level is low.
Good Read LED
Good read.
Data LED
There is data in FLASH memory.
FLASH memory depleted.
Function LED
Bluetooth turned on, but no Bluetooth
connection established and the Piranha not found.
Bluetooth turned on, but no Bluetooth
connection established and the Piranha found.
Bluetooth connection established.
Data transmission via Bluetooth in progress.
USB mode enabled.
Batch data transmission via USB in progress.
8