Set Terminating Character Suffix
The scanner provides a shortcut for setting the terminating character suffix to CR (0x0D) or CRLF (0x0D,0x0A) by scanning
the appropriate barcode below.
【Terminating Character CR (0x0D)】
To set a terminating character suffix, scan the Set Terminating Character Suffix barcode, the numeric barcodes
corresponding to the hexadecimal value of a desired terminating character, and the Save barcode.
Note: A terminating character suffix cannot exceed 2 characters.
Set the terminating character suffix to "0A":
1.
2.
3.
4.
5.
6.
119
【Set Terminating Character Suffix】
Scan the Enter Setup barcode.
Scan the Set Terminating Character Suffix barcode.
Scan the numeric barcodes "0" and "A".
Scan the Save barcode.
Scan the Enable Terminating Character Suffix barcode.
Scan the Exit Setup barcode.
【Terminating Character CRLF (0x0D,0x0A)】
【Enter Setup】
**【Exit Setup】