Table of Contents
Advertisement
6.11 Installing the re-sync unit
Necessary tools
Slot screwdriver (100 x 4 mm).
How to install the re-sync unit on the ILite tile ?
1. Place the re-sync unit (M) into position.
Caution:
Be careful with the board to board connectors between the re-sync unit and the controller unit underneath.
Image 6-18
2. Fasten the two captive screws of the re-sync unit (M) using a slot screwdriver.
R5976865 ILITE 6/8/10/12 DISPLAY 14/12/2007
M
6. Tile reassembling
47
Advertisement
Table of Contents
Troubleshooting
