6. Tile reassembling
6.4
Installing the DIMM-PC
C
AUTION
use static control precautions in servicing this equipment. Field service or maintenance personnel should
be properly grounded before servicing. Wear an ESD wristlet when servicing this equipment. The use of
antistatic gloves is recommended.
Necessary tools
No tools.
How to install the DIMM-PC on the controller unit ?
1. Insert the DIMM-PC into the socket on the controller unit as illustrated.
Tip:
Ensure there is no dust in the sockets on the controller unit . Use compressed air to blow out the dust.
Image 6-7
2. Press down the DIMM-PC.
38
:
Electrostatic Sensitive Device (ESD). To avoid equipment damage from electrostatic discharge,
R5976865 ILITE 6/8/10/12 DISPLAY 14/12/2007