Tile Reassembling - Barco ILite 6 Service Manual

6. TILE REASSEMBLING

About this chapter
This chapter contains all the necessary procedures to reassemble the ILite tile. Each procedure describes, with detailed step by
step actions and illustrations, how to attach a certain part of the ILite tile. Each procedure start with an enumeration of tools required
to attach this part. The procedures are arranged in an assembling order. So, start with the procedure in this chapter which explain
how to install that part you removed last and continue with the next one until the ILite tile is completely reassembled. Pay attention
to the warnings, cautions, notes and tips mentioned in the procedures.
Overview
• Installing a new mask
• Installing a LED module
• Installing the LED driver
• Installing the DIMM-PC
• Installing the controller unit
• Installing the fan
• Installing the power unit
• Installing the power assembly
• Installing the handles of the cover
• Installing the cover
• Installing the re-sync unit
R5976865 ILITE 6/8/10/12 DISPLAY 14/12/2007
6. Tile reassembling
33