Cleaning The Outside Of The Ilite Display - Barco ILite 6 Service Manual

7. Maintenance
7.1

Cleaning the outside of the ILite display

W
ARNING
Hazardous product. Irritating to eyes and skin. Always use in a well ventilated area. Vapors may cause drowsi-
ness and dizziness. Avoid contact with skin and eyes. In case of contact with the eyes, rinse immediately with
plenty of water and seek medical advise.
C
AUTION
Hazardous product. Lightly flammable. Always use in a well ventilated area. Keep away from sources of
ignitions. Do not smoke while working with isopropanol. Exclusive keep in original container tightly closed
at a cool, well ventilated and fireproof storage space.
C
AUTION
essary precautions to prevent damage to the LED's.
Necessary tools
• Compressed air.
• Isopropanol alcohol.
• Damp antistatic cloth.
• Vacuum cleaner.
• Mild detergent solution.
How to clean the outside of the ILite display ?
1. Switch of the ILite display.
2. Blow away the dust from the display side (LED's) with compressed air.
3. Clean the display side (LED's) with a damp antistatic cloth. It's recommend to use isopropanol alcohol as a solvent for cleaning
the LED's.
Warning: Ensure that the area is well ventilated. No smoking is allowed while working with isopropanol alcohol.
Caution: LED components used in ILite display are ESD (Electro-Static Discharge) sensitive. Take the necessary precautions
to prevent damage to the LED's.
4. Vacuum the ventilation grid at the rear of the ILite tile.
Tip: Use a soft brush nozzle to avoid scratches.
Caution: Do not use the vacuum cleaner to clean the display side (LED's), because of ESD reason.
5. Clean the housing of the ILite display with a damp cloth. Stubborn stains may be removed with a cloth lightly dampened with
mild detergent solution.
Always clean all tiles of the LED-wall to avoid brightness differences between cleaned and uncleaned tiles.
It's recommended to vacuum the ventilation grid at the rear of the ILite tile at regular intervals. For that, use
a vacuum cleaner with a soft brush nozzle.
50
:
ISOPROPANOL ALCOHOL (200–661–7).
:
ISOPROPANOL ALCOHOL (200–661–7).
:
LED components used in ILite display are ESD (Electro-Static Discharge) sensitive. Take the nec-
R5976865 ILITE 6/8/10/12 DISPLAY 14/12/2007