Barco ILite 6 Service Manual page 39

Image 6-3
If no, press the mask firmly against the LED module and dip of the surplus of silicone on the LED's.
Tip: Inspect the surface of the mask at an angle to ensure an overall flatness.
Image 6-4
Reinstall the LED module and place the tile on a flat clean surface for at least 24 hours to harden the silicone.
Screen side facing the surface.
R5976865 ILITE 6/8/10/12 DISPLAY 14/12/2007
A
C
T
6. Tile reassembling
35