Installing The Handles Of The Cover - Barco ILite 6 Service Manual

6.9

Installing the handles of the cover

The cover has to be removed from the tile before you can install a new handle.
Necessary tools
• Torx T20.
• 7 mm nut driver.
How to install a handle on the cover ?
1. Place the handle (N) into position upon the cover (L). See illustration.
Note: The left and right handle of the cover are different.
P
Image 6-16
2. Fasten the handle (N) with four screws.
R5976865 ILITE 6/8/10/12 DISPLAY 14/12/2007
L
N
6. Tile reassembling
45