Removing The Fan - Barco ILite 6 Service Manual

5. Tile disassembling
5.6

Removing the fan

Before you can remove the fan from the power support plate, you have to remove the power assembly from
the ILite tile first.
Necessary tools
Phillips screwdriver H2.
How to remove the fan from the power support plate ?
1. Disconnect the wire unit of the fan from the power unit and release the fan from the cable holders on the power support plate
(see white arrows on the illustration below).
Image 5-8
2. Release the four screws (T) which attach the fan (K) to the power support plate (I). Use a Phillips screwdriver type H2.
T
Image 5-9
3. Remove the fan (K) from the power support plate (I).
26
I
K
R5976865 ILITE 6/8/10/12 DISPLAY 14/12/2007