Removing The Dimm-Pc - Barco ILite 6 Service Manual

5. Tile disassembling
5.8

Removing the DIMM-PC

C
AUTION
use static control precautions in servicing this equipment. Field service or maintenance personnel should
be properly grounded before servicing. Wear an ESD wristlet when servicing this equipment. The use of
antistatic gloves is recommended.
The DIMM-PC is located on the controller unit. Before you can remove the DIMM-PC from the controller unit,
you have to remove the controller unit from the ILite tile first.
Necessary tools
No tools.
How to remove the DIMM-PC from the controller unit ?
1. Gently pull open the latches at the side of the DIMM-PC socket until the DIMM-PC jumps up.
Image 5-11
2. Remove the DIMM-PC out of the socket.
28
:
Electrostatic Sensitive Device (ESD). To avoid equipment damage from electrostatic discharge,
R5976865 ILITE 6/8/10/12 DISPLAY 14/12/2007