Cleaning The Inside Of The Ilite Tile - Barco ILite 6 Service Manual

7.2

Cleaning the inside of the ILite tile

Necessary tools
• Torx T20.
• Nut driver 7 mm.
• Compressed air.
How to clean the inside of the ILite display ?
1. Remove the cover of the ILite tile.
2. Unplug the wire unit of the fan.
Caution: Always disconnect the wire unit of the fan before starting to blow out the dust. Otherwise, the fan may act as a
generator and induces high current which can cause damage to the power supply unit.
Image 7-1
3. Remove the power assembly (power unit + power support plate + fan). It's not necessary to disassemble the power unit and the
fan from the power support plate.
4. Blow out the dust from the controller unit, both sides of the power assembly and the inside of the cover with compressed air.
5. Reinstall the power assembly.
6. Reconnect the wire unit of the fan with the power unit.
7. Reinstall the cover of the ILite tile.
R5976865 ILITE 6/8/10/12 DISPLAY 14/12/2007
7. Maintenance
51