Removing The Cover - Barco ILite 6 Service Manual

5.2

Removing the cover

It's not necessary to remove the re-sync unit first. The re-sync unit is attached to the cover and comes off
with the cover.
Necessary tools
• Torx T20.
• 7 mm nut driver.
How to remove the cover ?
1. Release the six screws (P) of the ILite cover (L), one in each corner and one under each handle.
F
Image 5-2
2. Remove the cover from the rest of the tile (L).
R5976865 ILITE 6/8/10/12 DISPLAY 14/12/2007
5. Tile disassembling
L
P
21