Display Installation; Removing The Connector Compartment Cover - Barco Coronis Uniti MDMC-12133 User Manual

3. DISPLAY INSTALLATION

Prior to installing your Coronis Uniti and connecting all necessary cables, make sure to
have a suitable display controller physically installed in your computer. If you are using
a Barco display controller, please consult the user guide delivered with it to do this.
For a list of compatible display controllers, please refer to the latest version of the com-
patibility matrix available on
patibility Matrices > Barco Systems Compatibility Matrices).
3.1

Removing the connector compartment cover

The connector compartment cover should be removed to get access to the connectors.
To remove the connector compartment cover
1. Gently push the two lips on the top of the cover.
2. Pull the top of the cover slightly away from the display and lift the cover upwards.
3. Remove the cover.
K5902079 CORONIS UNITI 21/04/2015
my.barco.com (MyBarco > My Support > Healthcare > Com-
3. Display installation
9