Removing The Cover; Connecting The Cables - Barco Eonis MDRC-2122 WP User Manual

3. Display installation
Image 3-2
C
AUTION
could cause serious damage to your display and its stand.
3.3

Removing the cover

To remove the connector compartment cover
The connector compartment cover should be removed to get access to the connectors. To remove the
cover, gently slide the connector compartment cover upwards and remove it from the display.
Image 3-3
3.4

Connecting the cables

To connect the cables
1. Connect one or more of the video input connections of your display (VGA, HDMI or DisplayPort) to the
corresponding video outputs on your computer or any other video device.
2. If you want to make use of the display's USB downstream connectors, then connect your workstation
with the display's USB upstream connector by means of the supplied USB cable.
3. Connect a speaker, amplifier, ... with the display's audio line out if you want to use the internal sound
option of your display.
8
:
Do not try to pivot your display when attached to the stand. Trying to do so
K5903049 EONIS 25/06/2015