Display Installation; Adjusting The Display Position; Removing The Cover - Barco Eonis MDRC-2224 User Manual

3. DISPLAY INSTALLATION

3.1

Adjusting the display position

To adjust the display position
You can now safely pivot, tilt, swivel, raise and lower your display as desired.
Image 3-1
The standard orientation of the video input is landscape. If you use the display in portrait
mode, make sure you change the orientation of the video input via the screen settings
of the computer.
W
ARNING
3.2

Removing the cover

To remove the connector compartment cover
The connector compartment cover should be removed to get access to the connectors. To remove the
cover, gently slide the connector compartment cover upwards and remove it from the display.
K5903081 EONIS 08/03/2016
:
The display must be in its highest position before it can be properly pivoted.
3. Display installation
7