Notifier AFP-2800 Operation, Installation & Programming Manual page 59

6.3.5.1.2 S
ERVICE
Once you have selected the Dout you wish to change you will be in the "Modify Point" screen as follows:
MODIFY POINT
DAY MODE
20 JULY 2002 14:44:37
PLEASE ENTER THE INFORMATION BELOW:
SELECTED POINT: 1.1.o1
NAME. >
Overwrite mode
You will then be prompted to enter a control script for the point as follows:
MODIFY POINT
DAY MODE
20 JULY 2002 14:44:37
PLEASE ENTER THE INFORMATION BELOW:
SELECTED POINT: 1.1.o1
'EWIS OUTPUT LEVEL 1' OPERATES WHEN:
\ >(No script found for this point)
Enter condition using Zone (Z3) or
point numbers (1.2.I4).
Operators:
'AND','OR','!','T','..AND/OR..'
Overwrite mode
Note: If the Selected Point already has data, the existing data will be displayed. This data may be modified by
overwriting, or can be confirmed by just pressing the ENTER button for the field (using the soft or hard
buttons, or the Enter key on the keyboard).
Overwrite/Insert mode can be toggled by pressing the Insert key on the QWERTY keyboard.
AFP-2800/2802 Manual – P/N 11249 11-Mar-08
M – C
ENU ONFIG
A = 0
F = 0
I = 0
N = 1
Use arrows to move
around.
INS,DEL to edit lines.
ENTER accept line and/or
Skip to next item
ESC to leave this screen
ESC
BACKSP ENTER
A = 0
F = 0
I = 0
N = 1
Use arrows to move around.
INS,DEL to edit lines.
ENTER accept line and/or
Skip to next item
ESC to leave this screen
ENTER ESC
– D
OUT
Actions:

Use the external keyboard to enter a descriptor
(up to 28 characters) for the output and press the
ENTER button.

You will then be prompted to accept, press YES
to accept or NO to redo.

ESC will take you back to the previous screen.
Actions:

Type in the control script you wish the point to be
controlled by and press ENTER

The AFP-2800/2802 will then check the syntax,
report any errors and give you the option to accept
Yes/No. Press YES or NO as appropriate. See
page 81 for more information on entering control
scripts.

ESC will take you back to the previous screen.
Panel Operation
57