Notifier AFP-2800 Operation, Installation & Programming Manual page 42

Panel Operation
6.3.3.9 S
ERVICE
This screen will display all conventional alarm zones (AZF's) detected on the system. Zones which have been
allocated zone numbers will display the zone number, the physical point number (Ring/Module/I/O format), and
the zone description.
Unallocated zones will default to Z0 for the zone number, and the description will be the type of field module to
which the zone belongs. i.e. (AZM8 etc.)
ALARM ZONE LIST
DAY MODE
20 JULY 2002 14:44:37
USE UP/DOWN BUTTONS TO SELECT A ZONE:
00.001.Z01 (Z0 ) PANEL BREAK GLASS
00.001.Z01 (Z0 ) PANEL DOOR OPEN
01.001.Z01 (Z4 ) CARPARK L4
01.001.Z02 (Z3 ) CARPARK L3
01.001.Z03 (Z2 ) CARPARK L2
01.001.Z04 (Z1 ) CARPARK L1
01.001.Z05 (Z1 ) LOBBY
01.001.Z06 (Z0 ) (AZM8)
01.001.Z07 (Z0 ) (AZM8)
01.001.Z08 (Z0 ) (AZM8)
01.002.Z01 (Z12 ) LEVEL 1 CORRIDOR
01.002.Z02 (Z13 ) LEVEL 2 CORRIDOR
01.002.Z03 (Z212) ROOM 212
01.002.Z04 (Z213) ROOM 213
01.002.Z05 (Z214) ROOM 214
01.002.Z06 (Z10 ) LIFT MOTOR ROOM
01.002.Z07 (Z0 ) (AZM8)
01.002.Z08 (Z0 ) (AZM8)
UP DOWN TEST
In the above example, the following abbreviations of STATUS apply.
Note: You can also use the arrow keys, the Page Up and Page Dn keys on an external keyboard for scrolling
functions.
40
M – L – L
ENU IST
A = 0
F = 1
I = 1
N = 1
x
I
F
CHANGE BACK
Status
Abbreviation
A
I
F
X
– AZF
IST
Actions:

Use the UP and DOWN buttons to scroll through
AZF points.

When highlighting an AZF input point, pressing the
TEST button will take you into the test menu for
AZF's (refer page 68) providing the options for an
alarm and fault test.

Pressing the CHANGE button will take you to the
modify point screen (refer to page 56)

Pressing the BACK button will return you back to
the service menu
Meaning
Alarm
Isolated
Fault
Activated
AFP-2800/2802 Manual – P/N 11249 11-Mar-08