How To Use Touch 10 - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

How to use Touch 10

The Touch 10 user interface and its use are described in
full detail in the User guide for the video system.
D15330.02 SX10 Administrator Guide CE8.1, APRIL 2016.
Configuration Peripherals
Indicates wether or not the
Proximity feature is available.
Tap the settings icon (cogwheel)
to open the System Information
and Settings menu, Restart the
video system, and activate and
deactivate Standby, Proximity and
Do not disturb modes.
Tap Dial to invoke the dial pad.
Tap Contacts to invoke the list
of contacts including Favorites,
Directory and Recents.
Tap Meetings to invoke a list of
upcoming scheduled meetings.
Maintenance
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
121
Administrator Guide
System settings Appendices Appendices
Entry icon for in-room controls, if available.
Tap ? to contact Help desk, if available.
Tap the Camera icon to activate
self-view and camera control.
Tap Share
sharing content and to
conduct presentations.
Press the
button to mute and unmute
microphones.
Press and hold the left side of the
Volume button to decrease the
loudspeaker volume and the right
side to increase the volume.
Tap Messages
voice mail system, if available.
Time of day.
to start
Microphone
to invoke the