Upgrade The System Software - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

Upgrade the system software

About upgrading from TC to CE software
CE8.x is the evolution of TC7.x software. CE8.x inherits
years of development in the TC software while being more
streamlined, providing higher quality and higher feature
velocity.
It is important to carefully consider the upgrade requirements
of CE8.x and the functionality changes compared to TC7.x
software before upgrading.
We highly recommend upgrading endpoints to TC7.3.3 or
later before proceeding with the upgrade to CE8.0 or later.
Upgrading to CE software from TC7.3.0 and TC7.3.1 is not
supported via the web interface.
If you do not take into account these considerations,
upgrading to CE8.x can leave you with a non-functioning
deployment that requires you to downgrade.
CE software does not support the following features and products:
*
- CTMS conferencing
- MediaNet
- 4:3 video resolutions
Also note that CE software does not support the EX Series, C Series,
Profile Series, and first-generation MX200 and MX300
D15330.02 SX10 Administrator Guide CE8.1, APRIL 2016.
Configuration Peripherals
(page 1 of 2)
Upgrade via Cisco TMS or
CUCM. Alternatively upgrade
to TC7.3.3 or later before
attempting to upgrade via the
web interface
Use TC7.x software
Upgrade to TMS 15.0 or later
Update your application to the
new API commands before
installing CE8.0 or later
Maintenance Maintenance
Install CE8.0 or later?
Are your endpoints
Yes
running TC7.3.1 or
earlier?
Do you require
Yes
features that are
no longer
supported?
Yes Do you use TMS, and
have an older version
than TMS 15.0?
Are you currently
Yes
using the API (for
example Crestron or
AMX)?
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
49
Administrator Guide
System settings Appendices
No
*
No
No
No
Install CE8.0 or later