Video Input Connector [1; Video Input Connector [2..3] Presentationselection; Video Input Connector [2] Rgbquantizationrange; Video Monitors - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

Video Input Connector [2..3] PresentationSelection

Define how the video system will behave when you connect a presentation source to the
video input.
If the video system is in standby mode, it will wake up when you connect a presentation
source. Sharing the presentation with the far end requires additional action (select Share on
the user interface) except when this setting is set to AutoShare.
Requires user role: ADMIN
Default value: OnConnect
Value space: AutoShare/Manual/OnConnect
AutoShare: While in a call, the content on the video input will automatically be presented
to the far end as well as on the local screen when you connect the cable. You do not
have to select Share on the user interface. If a presentation source is already connected
when you make or answer a call, you have to manually select Share on the user
interface.
Manual: The content on the video input will not be presented on the screen until you
select Share from the user interface.
OnConnect: The content on the video input will be presented on screen when a cable is
connected. Otherwise, the behavior is the same as in manual mode.

Video Input Connector [2] RGBQuantizationRange

The devices connected to the video input should follow the rules for RGB video quantization
range defined in CEA-861. Unfortunately some devices do not follow the standard and this
configuration may be used to override the settings to get a perfect image with any source.
Requires user role: ADMIN
Default value: Auto
Value space: Auto/Full/Limited
Auto: RGB quantization range is automatically selected based on video format according
to CEA-861-E. CE video formats will use limited quantization range levels. IT video
formats will use full quantization range levels.
Full: Full quantization range. The R, G, B quantization range includes all code values (0 -
255). This is defined in CEA-861-E.
Limited: Limited Quantization Range. R, G, B quantization range that excludes some code
values at the extremes (16 - 235). This is defined in CEA-861-E.
D15330.02 SX10 Administrator Guide CE8.1, APRIL 2016.
Configuration Peripherals Maintenance
Video Input Connector [1..3] Visibility
Define the visibility of the video input connector in the menus on the user interface.
Note that Connector 1 is the system's integrated camera, which is not available as a
presentation source.
> The default value is Always for Video Input Connector 2 Visibility (the HDMI connector).
> The default value is IfSignal for Video Input Connector 3 Visibility (the VGA connector).
Requires user role: ADMIN
Default value: Connector 1: Never Connector 2: Always Connector 3: OnConnect
Value space: Connector 1: Never Connector 2, 3: Never/Always/IfSignal
Never: When the input source is not expected to be used as a presentation source, set
to Never.
Always: When set to Always, the menu selection for the video input connector will
always be visible on the graphical user interface.
IfSignal: When set to IfSignal, the menu selection for the video input connector will only
be visible when something is connected to the video input.

Video Monitors

Define the monitor layout mode. Note that this video system supports only one monitor, so
this value is fixed and cannot be changed.
Requires user role: ADMIN
Default value: Single
Value space: Single
Single: The layout is shown on the video system's monitor.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
114
Administrator Guide
System settings System settings Appendices