Cisco TelePresence SX10 Quick Set
Introduction
Overview of the system settings
In the following pages you will find a complete list of the system
settings which are configured from the
Setup > Configuration
page on the web interface.
Open a web browser and enter the IP address of the video
system then sign in.
How to find the IP address
1. Select the settings icon (cogwheel) on the home
screen, or in the status bar of the Touch controller.
2. Select
System Information
with the remote control, or
Settings > System Information
D15330.02 SX10 Administrator Guide CE8.1, APRIL 2016.
Configuration
Peripherals
on the Touch controller.
Maintenance
Audio settings ................................................................................................................. 67
Audio DefaultVolume ........................................................................................................... 67
CallHistory settings ......................................................................................................... 69
CallHistory Mode ................................................................................................................. 69
Cameras settings ............................................................................................................ 70
Cameras Camera [1] Flip ..................................................................................................... 70
Cameras Camera [1] Mirror ................................................................................................. 71
Conference settings ....................................................................................................... 72
www.cisco.com - Copyright © 2016 Cisco Systems, Inc. All rights reserved.
63
Administrator Guide
System settings
System settings
Appendices
Need help?
Do you have a question about the TelePresence SX10 Quick Set and is the answer not in the manual?