Cisco TelePresence SX10 Quick Set Administrator's Manual page 8

Cisco TelePresence SX10 Quick Set

Introduction Introduction
New features and improvements in CE8.0
Products
CE8.0 supports the following products:
• MX200 G2
• MX300 G2
• MX700
• MX800
• SX10 Quick Set
• SX20 Quick Set
• SX80
Cisco TelePresence products in EX Series, C Series,
and Profile Series are not supported in CE software; use
software version TC7.3 or earlier for these products.
User interfaces
Products running CE software, must use the following
user interfaces:
• Touch 10 controller, available for all products.
• TRC6 remote control, available for SX10 and SX20.
Touch 8 controller and remote control TRC5 are not
supported.
API changes
The number of API commands has been reduced.
Some commands are removed, and others are different
syntactically in order to cater for underlying architectural
changes.
More status information and configurations are available
on the video system's web interface than in the API.
Refer to the What's New chapter in the API guide for the
video system, to see the changes that are made to the
public API.
D15330.02 SX10 Administrator Guide CE8.1, APRIL 2016.
Configuration Peripherals
Intelligent Proximity for content sharing
Cisco Proximity allows you to automatically pair your
device (smartphone, tablet, or laptop) with the video
system when the device comes within range. This feature
is disabled by default.
Cisco Proximity offers three services: Content sharing to
clients, content sharing from clients and basic call control.
These services are disabled by default.
The Cisco Proximity clients for smartphones and tablets
(Android and iOS), and laptops (Windows and OS X) can
be downloaded from
for smartphones and tablets are also available through
Google Play (Android) and Apple App Store (iOS).
Microphone LED behaviour
The LED behavior on microphones and Touch 10 has
changed. The microphone LED glows and the mute button
is active in the following scenarios:
• When initiating an outgoing call and until the call is
disconnected.
• When receiving an incoming call and until the call is
disconnected.
• When activating the VU meter on the web interface to
test the audio levels.
The color indications, green for active and red for muted,
have not changed.
PIN code protection
The on-screen Advanced Settings menu can be PIN code
protected to prevent unauthorized users from changing
the configuration of the video system.
Maintenance
► http://proximity.cisco.com. Clients
8
Administrator Guide
System settings
Resolution changes
Collaboration Endpoint Software only supports displays
that support 16:9 resolution.
Supports 1080p presentation sharing both locally and in a
call, at 5 frames per second.
Remote monitoring
For increased security, it is only possible to take
snapshots of the local and far end video streams from the
video system's web interface, when a Remote Monitoring
option key is installed on the video system.
Remote monitoring is enabled once the option key is
added, and the video system is rebooted.
No warning messages or indicators are sent to the users
of the video system. Please provide adequate notice to
the users that the system administrator may monitor and
control the camera and screen.
Removed features
• Cisco CTMS is no longer supported. Other multipoint
conferencing solutions (involving Cisco TelePresence
Server, Cisco TelePresence MCU, and/or Cisco
TelePresence Conductor) may be used instead.
• MediaNet is no longer supported.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
Appendices