Cisco TelePresence SX10 Quick Set Administrator's Manual page 9

Cisco TelePresence SX10 Quick Set

Introduction Introduction
System configuration changes in CE8.1
New configurations
Audio Input Microphone [2] EchoControl Dereverberation
Audio Input Microphone [2] EchoControl Mode
Audio Input Microphone [2] EchoControl NoiseReduction
Audio Input Microphone [2] Mode
Audio Output Line [n] Delay DelayMs
Audio Output Line [n] Delay Mode
Logging External Mode
Logging External Protocol
Logging External Server Address
Logging External Server Port
Security Session MaxSessionsPerUser
Security Session MaxTotalSessions
SIP Ice OfferTcpCandidates
Configurations that are removed
Conference Presentation RelayQuality
Conference VideoBandwidth MainChannel Weight
SIP Turn BandwidthProbe
D15330.02 SX10 Administrator Guide CE8.1, APRIL 2016.
Configuration Peripherals Maintenance
Configurations that are modified
Cameras Camera [n] Flip
OLD: <Auto / Off / On>
NEW: <Auto>
Conference DefaultCall Rate
OLD: Default value: 1920
NEW: Default value: 3072
Conference DoNotDisturb DefaultTimeout
OLD: Integer (0..1440)
NEW: Integer (1..1440)
Conference VideoBandwidth PresentationChannel Weight
OLD: Integer (1..10)
Default value: 2
NEW: Integer (1..9)
Default value: 5
FacilityService Service [1] Name
OLD: Default value: ""
NEW: Default value: "Live Support"
Phonebook Server [1] Type
OLD: <CUCM / Off / TMS / VCS>
NEW: <CUCM / Off / Spark /TMS / VCS>
Provisioning Mode
OLD: <Auto / CUCM / Edge / Off / TMS / VCS>
NEW: <Auto / CUCM / Edge / Off / Spark / TMS / VCS>
SIP DisplayName
OLD: String (0, 255)
NEW: String (0, 550)
Standby BootAction
OLD: Default value: DefaultCameraPosition
NEW: Default value: RestoreCameraPosition
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
9
Administrator Guide
System settings Appendices