Security Session Maxsessionsperuser; Security Session Maxtotalsessions; Security Session Showlastlogon; Security Audit Server Port - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

Security Audit Server Port

The audit logs are sent to a syslog server. Define the port of the syslog server that the
system shall send its audit logs to. This setting is only relevant when Security Audit Server
PortAssignment is set to Manual.
Requires user role: AUDIT
Default value: 514
Value space: Integer (0..65535)
Set the audit server port.

Security Audit Server PortAssignment

The audit logs are sent to a syslog server. You can define how the port number of the
external syslog server will be assigned. This setting is only relevant when Security Audit
Logging Mode is set to External or ExternalSecure. To see which port number is used you
can check the Security Audit Server Port status. Navigate to Configuration > System status
on the web interface or; if on a command line interface, run the command xStatus Security
Audit Server Port.
Requires user role: AUDIT
Default value: Auto
Value space: Auto/Manual
Auto: Will use UDP port number 514 when the Security Audit Logging Mode is set to
External. Will use TCP port number 6514 when the Security Audit Logging Mode is set to
ExternalSecure.
Manual: Will use the port value defined in the Security Audit Server Port setting.

Security Session InactivityTimeout

Define how long the system will accept inactivity from the user before he is automatically
logged out.
Restart the system for any change to this setting to take effect.
Requires user role: ADMIN
Default value: 0
Value space: Integer (0..10000)
Set the inactivity timeout (minutes); or select 0 when inactivity should not enforce
automatic logout.
D15330.02 SX10 Administrator Guide CE8.1, APRIL 2016.
Configuration Peripherals Maintenance

Security Session MaxSessionsPerUser

The maximum number of simultaneous sessions per user. 0, which is the default value,
means no hard limit. Sessions consume resources, so there will be some limitation, but this
may vary based on different criteria.
Requires user role: ADMIN
Default value: 0
Value space: Integer (0..100)
The maximum number of sessions per user. 0 means no hard limit.

Security Session MaxTotalSessions

The maximum number of simultaneous sessions in total. 0, which is the default value,
means no hard limit. Sessions consume resources, so there will be some limitation, but this
may vary based on different criteria.
Requires user role: ADMIN
Default value: 0
Value space: Integer (0..100)
The maximum number of sessions in total. 0 means no hard limit.

Security Session ShowLastLogon

When logging in to the system using SSH or Telnet you will see the UserId, time and date of
the last session that did a successful login.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
On: Show information about the last session.
Off: Do not show information about the last session.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
98
Administrator Guide
System settings System settings Appendices