Cisco TelePresence SX10 Quick Set Administrator's Manual page 7

Cisco TelePresence SX10 Quick Set Administrator Guide

Introduction Introduction Configuration Peripherals Maintenance System settings Appendices
Change in audio only avatar behavior
Full screen avatar for audio only participants has been
removed. The audio only participants continue to be
visible in the filmstrip during a call.
Intelligent Proximity updates
Sharing a presentation with the Cisco Intelligent Proximity
desktop application renders the laptop's mouse pointer on
screen. This feature requires the latest version of Cisco
Proximity for Desktop together with CE8.1.
When using a video system with the TRC6 remote control,
users can temporarily enable and disable the Intelligent
Proximity services. This was previously only available on
the Touch 10.
Direct content sharing
You can configure the video system to automatically
share a presentation with the far-end participants
when connecting a presentation source during a call. In
previous software versions, sharing a presentation with
the far-end always required you to manually select Share
with the remote control or Touch controller.
If a presentation source is already connected when the
call starts, you must manually select Share to share the
presentation with the far-end.
For further details, refer to the Video Input Connector [n]
PresentationSelection setting.
D15330.02 SX10 Administrator Guide CE8.1, APRIL 2016. www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
7