Cisco TelePresence SX10 Quick Set
Introduction
Run diagnostics
Sign in to the web interface and navigate to
Diagnostics.
The diagnostics page lists the status for some common
sources of errors
.
*
Errors and critical issues are clearly marked in red color;
warnings are yellow.
*
The messages shown in the illustration serve as examples. Your system
may show other information.
D15330.02 SX10 Administrator Guide CE8.1, APRIL 2016.
Configuration
Peripherals
Maintenance >
Maintenance
Maintenance
Run diagnostics
Click
Re-run diagnostics
to ensure that
the list is up to date.
Leave standby mode
Click
Deactivate standby
to wake up a
video system that is in standby mode.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
53
Administrator Guide
System settings
Appendices
Need help?
Do you have a question about the TelePresence SX10 Quick Set and is the answer not in the manual?