Cisco TelePresence SX10 Quick Set Administrator's Manual page 21

Cisco TelePresence SX10 Quick Set

Introduction Introduction
How to administer the video system (page 5 of 5)
Settings available from the remote control
You have access to the following information and settings when
you use the TRC6 remote control:
• System information
• Warnings and error messages
• Restart of the video system
• Loudspeakers and microphones check, default camera preset
and screen adjustment, presentation sharing test
• Basic settings for language, time zone, network and
provisioning (service activation)
• Extended logging
• Factory reset
D15330.02 SX10 Administrator Guide CE8.1, APRIL 2016.
Configuration Peripherals
Access system information and settings
1. Navigate to the settings icon (cogwheel) on the home screen.
2. Select System Information
issues, and a Restart button.
3. Then, select
configurations.
You may be prompted for a PIN code to open this menu.
Consult the
menu section for more details.
Consult the Getting Started Guide for your video system for more
details.
Maintenance
to find system information, potential
Settings for system adjustments and basic
► Set a PIN code for the on-screen Settings
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
21
Administrator Guide
System settings Appendices