Input/Output Connector Locations; Input/Output Ports; Serial Ports; Video Port - IBM TotalStorage IP Storage 200i 110 Installation Manual

Table of Contents

Advertisement

Input/output connector locations

Figure 11 shows the input/output connectors (ports) and LEDs on the rear of the
engine.
Figure 11. Input and output connector ports

Input/output ports

This section provides information about the input/output (I/O) ports supported for
your appliance.

Serial ports

Each appliance has two standard serial ports: Serial port A and Serial port B. The
operating system can use and share both serial ports; however, the integrated
Service Console can use only Serial port A.

Video port

Each appliance has an integrated super video graphics array (SVGA) video
controller to which you can attach a monitor. A monitor is not required during
installation or normal operation.

Keyboard port

There is one keyboard port on the rear of your appliance. The keyboard port is not
used during installation or normal operation.
6
7
8
1
DC power LED
2
AC power LED
3
Serial port A
4
Mouse port
5
Keyboard port
6
Ethernet port
7
ISM ports
8
USB ports
9
Serial port C
10
Video port
Chapter 2. Installation procedures
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Totalstorage ip storage 200i 210

Table of Contents