Table of Contents
Advertisement
7. Use the cable straps or cable ties to secure the cables to the
8. Insert the M6 screws through the release-latch bracket assembly.
Connecting external options
This section shows you the location of the parts to which you can connect any
external devices.
Before attaching an external device, read the documentation that comes with your
options. Use the information in this section to understand the input/output ports on
the appliance.
The IP Storage 200i is a headless appliance. Do not attach a keyboard or monitor
to the appliance during installation or normal operation.
28
IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide
cable-management assembly.
Note: If you are moving the rack or if the rack is in a vibration-prone area,
inserting the M6 screw is required; otherwise, this step is optional.
Advertisement
Table of Contents
