8 ] Attaching The Head Spring And Head Holder B - Brother TD-2020 Service Manual

[ 8 ] Attaching the Head Spring and Head Holder B

(1) Set the two head springs between the bosses of the head holder B and the head
sub plate. Set the head holder B to the roll cover inner, and secure it with the four
taptite bind B M2.6X6 screws.
Bosses
Head springs
Bosses of the
head sub plate
Taptite bind B M2.6X6
Head holder B
Figure 3.5-10
III - 35
Roll cover inner