22Check Battery Charge - Brother TD-2020 Service Manual

1.2.22 Check Battery Charge
Checks that the machine enters the recharging mode by connecting the AC adapter and Li-ion
rechargeable battery to the optional battery base unit.
Model
TD-2000
TD-2100N
(1) Set the Li-ion rechargeable battery to the optional battery base unit again. Keep
connecting the AC adapter to the optional battery base unit while setting it.
(2) Make sure that the "Check battery charge" field is highlighted in yellow and press the
[Run] button to start the inspection.
(3) Once the message below appears in the "Results" field, the inspection is OK.
 Inspection pattern
• Battery charge is NG.
The machine is not in the recharging mode. Check if the Li-ion rechargeable battery is set
in the optional battery base unit, and the battery does not have any scratch or dirt. Also
check that the orange LED on the front surface of the optional battery base unit is lit.
Inspection
Invalid
Valid
Figure 48. "Check battery charge" start-up
Figure 49. "Check battery charge" OK.
Figure 50. "Check battery charge" NG.
1 - 30