8 ] The Paper Is Not Fed Correctly - Brother TD-2020 Service Manual

Hide thumbs Also See for TD-2020:
Table of Contents

Advertisement

[ 8 ] The paper is not fed correctly.

N
Replace the gears.
The paper feed is not correctly.
Try to print after replace
a new paper (roll).
Is tape feed normal?
N
Is the paper
passed upper the
insert guide?
Is the paper set at the
prescribed position?
(Cutter paper guide
position)
Y
Is paper dust on the platen?
N
Is the head pressure
1.2kgf 5% at the roller
center?
Y
Does the motor rotate?
Y
Do the gears rotate?
Y
The platen is defective.
Replace the platen.
Repair completed.
Y
The old thermal tape
is defective.
N
Insert the paper
correctly.
Clean the platen.
Y
Is the head spring
attached correctly?
N
Y
Replace the head spring.
N
Is the motor connected
correctly?
Y
Is the motor harness
damaged?
Y
If the replace the
main PCB ASSY, is it OK?
Y
The motor ASSY is defective.
Replace the motor ASSY.
IV - 9
Attach the
N
head spring
correctly.
N
Correct the
connection.
N
Replace the
motor ASSY.
N
Replace the
main PCB ASSY.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Td-2120nTd-2130n

Table of Contents