Download  Print this page

Mp Roller Holder Assy / Mp Separation Pad Assy / Mp Separation Pad Spring - Brother HL-5440D Service Manual

Brother laser printer.
Hide thumbs

Advertisement

9.37 MP roller holder ASSY / MP separation pad ASSY / MP separation pad spring

(1) Open the MP roller cover. Release the hook on the MP holder bushing, and slide the MP
holder bushing in the direction of arrow 1 to remove it from the machine.
(2) Slide the MP roller holder ASSY in the direction of arrow 2a to remove it from the MP
separation roller shaft. Then push the MP lift arm in the direction of arrow 2b to remove
the MP roller holder ASSY from the machine.
(3) Push the MP lift arm in the direction of arrow 2b. Raise the MP separation pad ASSY to
the 50-degree position, and remove it from the machine in the direction of arrow 3.
(4) Bend the MP separation pad spring inward to remove it from the machine.
MP lift arm
MP separation
roller shaft
MP roller holder ASSY
MP holder bushing
Assembling Note:
• Attach the MP roller holder ASSY while pushing the MP separation pad ASSY.
2b
Hook
1
Fig. 3-68
3-67
MP roller cover
2a
MP separation pad spring
3
50°
MP separation pad ASSY
Confidential

Advertisement

Table of Contents

   Related Manuals for Brother HL-5440D

Comments to this Manuals

Symbols: 0
Latest comments:
  • priyantha Jan 08, 2018 05:47:
    thank you very much help for repair a printer
  • taylor harris Oct 27, 2016 05:21:
    Nice work! I need help with this too! Just look at the service <code&g​t;https://​goo.gl/yeh​FJL</co​de>. Its pretty easy to use. I think you can get a free trial if you ask for it.