Brother TD-2020 Service Manual page 39

(5) Remove the two filament tapes from the main chassis R and the main chassis
ASSY.
(6) Remove the two screw bind M3X4 screws to remove the main chassis ASSY and
platen roller from the sub plate. Remove the screw bind M2X3 screw to remove
the platen bushing L from the main chassis ASSY.
(7) Remove the two screw bind M3X4 screws to remove the main chassis R from the
sub plate. Remove the screw bind M2X3 screw to remove the platen bushing R
from the main chassis R.
(8) Remove the two screw bind M3X4 screws to remove the front cover B from the
sub plate.
Filament tape
Screw bind M3X4
Main chassis
ASSY
Screw bind M3X4
Platen bushing L
Platen roller
Screw bind
M2X3
Sub plate
Front cover B
Figure 3.4-23
III - 25
Platen bushing R
Main chassis R
Filament
tape
Screw bind M3X4