Changing settings for RS-232C
The computer and the machine used in write serial number must be connected with RS-
232C. To connect to the optional COM port of the computer, change the inspection tool
settings by following procedures below.
(1)
Start the inspection tool and press the [General settings] button on the main screen.
(2)
Press the [Setting] button in the "Target connection" field.
(3)
Change the "Port No" according to the COM port number of the PC to be connected.
When it is changed, press the [OK] button.
Figure 59. [General settings] button
Figure 60. "Config" window
Figure 61. COM setting
1 - 35