Read Mac Address - Brother TD-2020 Service Manual

1.2.5 Read MAC Address

Acquires Wired LAN MAC address retained in EEPROM.
Model
TD-2000
TD-2100N
(1) This inspection starts automatically when the previous inspection is completed. When
operating this inspection again, check that the "Check Mac address" field is highlighted in
yellow, then press the [Run] button.
(2) Wired LAN MAC address appears in the "Mac address" field on the top of the window.
MAC address also appears in the "Results" field with a message confirming success.
 Inspection errors
• Can not connect.
The following error occurs when the machine is not connected with PC. Check that the
machine is connected to the PC properly and the machine is turned ON.
• The mac address vendor code error.
The error shown below occurs when the MAC address has not been written in the EEPROM
of the machine.
Inspection
Invalid
Valid
Figure 9. MAC address check result
Figure 10. Can not connect.
Figure 11. The mac address vendor code error.
1 - 9